*
*
Conference Host
8
the balance and save the manually adjusted
equalization mode for later recall. If the
equalizer function is selected here, you can
touch the "Settings" button behind it to enter the
equalizer setting interface.
As shown in the picture, the 14 band graphic
equalizer allows manual adjustment. Users may
save the current value as mode 1 to mode 6.
Users need to touch the mode button before
making any adjustment to the equalizer (for
example, "mode 1 is selected").
After the adjustment is completed, touch the
"Save mode" button to save the equalizer
values to "mode 1", so in the future, the user
may touch the "mode 1" button to call the
equalizer values.
4.1.8 Record control
On the main interface, touch the "Recorder" button
to enter the recorder operation interface. The
conference system can realize conference recording,
and the audio file recorded may be saved on a USB
flash disk. Before the recording is started, plug a
USB flash disk to the front panel of the conference
controller, otherwise the recording function cannot
be realized.
The audio file generated by this conference system
will be saved in wav format, which allows direct
playing on most computers.
The system supports "Automatic recording" and
"Manual recording" modes. On the recording
interface as shown above, the user may touch the
desired recording mode to select it.
Automatic recording: If the automatic
recording function is selected, the recording
will start when any speech is delivered via any
conference unit, and it will automatically stop
when the last speaking unit is off. The
recording may stop if there is not enough space
on the USB flash disk.
Manual recording: If manual recording is
selected, the user may start recording by
pressing the "Start" button and stop it by
pressing the "Stop" button. Under manual
recording mode, the recording will also
automatically stop if there is not enough space
on the USB flash disk.
On the recording interface, the user may view
the time length of recording, the file name of
recorded files and the time kept on the USB
flash disk.
Composition of file name:
By default, the file is named by the starting
date and time of the recording in wav format;
for example if the recording starts at 12:30:50
of August 1st, then the audio file will be
named as 08_01_12.30.50.wav. A new audio
file will be generated when the recording is
longer than 1 hour.
4.2 System Configuration
On the main interface, the user can press the
"System Setup" icon and then input the password
(the default password is 111111 and may be
changed by the user) and press the "OK" button to
enter the "System Setup" interface, which is as
shown below:
Summary of Contents for D6201
Page 2: ...此页留空供用户记事 ...
