14
5.6 Positioning
The unit can be lifted with a fork-truck between the
units feet or. The weight of the unit is shown in the
data sheet in appendix.
To enable inspection and service of the unit, adequate
working space must be left clear in front of the unit to
allow access doors to be opened and the rotor to be
removed. The free floor area in front of the inspection
doors should be as wide as the unit itself. For more
detailed information on working space and foot bolt-
hole dimensions, see appendix.
The standard unit is designed for indoor installation.
Weatherproof units can be supplied as an optional
extra.
FIGURE 16: Locating bracket
FIGURE 17: Dehumidifier leg
To allow securing of the dehumidifier to
the floor or to a pedestal, four brackets
with pre-drilled boltholes are delivered
with the unit.
Cooke Industries - Phone: +64 9 579 2185 Email: sales@cookeindustries.co.nz Web: www.cookeindustries.co.nz
