Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed after a launch sequence of several seconds. The wireless
LAN connection may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The 316T/MD may be configured using the utilities and methods dictated by
the software operating system. The 316T/MD should be configurable for various
properties such as user profiles, network features, and several system elements.
Wireless Networking
Wireless LAN
The 316T/MD is often delivered with an embedded (user-inaccessible) 802.11ax
WLAN adapter equipped with a hidden custom antenna.
• T
hrough the support of typical WLAN adapters, the 316T/MD should be able to
detect all 802.11 access points in the vicinity for you to select the access point of
your choice for connection.
• T
he SSID and WEP/WPA/WPA2 (if enabled) parameters on the 316T/MD and the
access points have to match. The SSID is case-sensitive and it is recommended
that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for
secure access.
•
When WEP/WPA/WPA2 is enabled, you may need to consult your network
administrator or your networking equipment literature to properly configure
associated settings such as Authentication mode, etc.
• R
efer to the access point operating manuals for setting up the 802.11 access
points.
OPERATION
Powering ON and OFF
To activate the 316T/MD, push and quickly release the Power Button. The display will
come on in a few seconds. To put the 316T/MD in Standby mode, push and quickly
release the Power Button. To turn the 316T/MD off for extended storage, power
off safely using any software function that “shuts down computer” provided in the
software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power—please use
the AC-DC adapter with the 316T/MD when setting up for the first time to fully
charge the internal battery pack. You may charge the external battery pack with
it attached to the 316T/MD, or with the optional external battery charger kit.
NOTE:
When the batterypack is charging, the blue-colored Battery LED should blink
slowly. If plugging in the AC-DC adapter does not trigger this blinking activity
and the LED stays dark, the battery pack may have been drained substantially.
Try unplugging/ replugging the AC-DC adapter to the 316T/MD a few times to
activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
tablet in “Standby” mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operation.
4
5
