1. -MP3-DVD Panel
Play related Buttons
: STOP/RETURN Button - Press once to memorize stop position. Press twice to re-play from first track.
: PLAY/PAUSE Button – For hold or continue play
: OPEN/CLOSE Button – To load or un-load disc.
Display Playing Time and State
Press [OSD] button. TV screen will display current play time state. i.e., playing time,
running time. Press [OSD] each time, the screen will show time alternatively
(the time displayed in the front panel will accordingly change)
The content to be displayed each time will be subject to the type of the disc.
Primal Setting for Video/Audio
The initial setting of the DVD player both for video (VGA or RGB) and
audio (stereo-mono or 5.1Ch) is very important.
Improper setting will cause failure to operate at all.
1) In case the display does not appear on the screen, press [P/N] button of remote control unit to select video output matching with your TV, Monitor
or Projector.
2) In case you do not have audio, press [AUDIO] button to select the correct audio output of stereo (mono) or 5.1Ch If 1) & 2) above have been
done correctly, you will have audio/video output.
How to use the Disc menu
This menu appears when playing DVD
Press [TITLE] button to see the Title menu.
Press [MENU/PBC] button to see disc menu.
- Select desired item by [▲][▼][ ][ ] button and press [ENTER]
- Press [MENU/PBC] button to change PBC function.
- Note the contents of disc menu differs per individual disc.
Play Fast Forward and Backward
While playing, you can press or on the remote control to play fast forward and backward. Five speeds 2X, 4X, 8X, and 32X are available.
If you press once, the speed increases by one shift. When the speed reaches max. speed, press this key again to return to normal state.
Slow Play
While playing, press [SLOW] to play slowly at different speed. You can play slow
forward or backward. Four speeds 1/2, 1/4, 1/8, 1/16X are available.
If you press [SLOW] once, the speed decreases by one shift, finally it returns to normal.
Skip to Next or Previous Track
While playing, press the or button to skip to next or previous track.
Repeat Play
While playing, you can press [RPT] to select different repeat content.
1.
For DVD disc, press [RPT] to repeat chapter, press [RPT] again to repeat
title again, press [RPT] again to exit.
2.
For non-DVD disc, when PBC is off, press [RPT] to repeat the track content,
press [RPT] again to repeat all discs, press [RPT] again to exit
MP3 Operation
MP3 is a disc which is recorded with an MP3 format audio program.
This DVD player supports MP3 discs, see the following examples:
Press [▲] [▼] button, the yellow band moves to “MP3”,
then press [ENTER] to play the selected track.
Operating the DVD player
Open the battery compartment and pull the battery clip 1 as indicated
by the arrowhead direction. Fit the battery onto the clip taking care of
polarity and push the clip back into the battery compartment.
Inserting the battery into the remote control unit
Remote Control
1. MUTE
2. POWER On-Off
3. PLAY/PAUSE
4. STOP/RETURN
5. PREV BUTTON
6. PROGRAM BUTTON
7. FAST REVERSE
8. A-B BUTTON
9. NUMBER KEYPAD
10. MENU/PBC BUTTON
11. Direction Button
12. OSD LANGUAGE BUTTON
13. MODE Button
14. OPEN/CLOSE Button
15. VOLUME “+”
16. PAL/NTSC Button
17. CLOCK Button
18. NEXT Button
19. VOLUME “-”
20. FAST FORWARD
21. REPEAT PLAYING Button
22. TITLE Button
23. LEFT/RIGHT AUDIO Button
24. GOTO Button
25. SUBTITLE Button
26. ANGLE Button
27. SETUP Button
28. ENTER Button
29. ZOOM Button
30. SLOW PLAYING Button
31. VGA MODE Switch
