DTC COMMUNICATIONS, INC.
5
OVERVIEW
What should you expect to receive with your 250mW
Transmitter?
1
VBS/VBL Video Transmitter
1
Dipole antenna with right angle SMA connector
1
One Video and Power In “Y” cable
1
DTC programming software package
1
DTC programming cable
8
Batteries
NOTE: The dipole antenna included is not recommended for normal
use! This antenna enables you to quickly set up your transmitter
and ensure proper operation. DTC highly recommends the use of
circularly polarized antennas for the best rejection of multi-path.
NOTE: DTC has provided you with a “Y” cable (power and video)
terminated with an RCA connector and a BNC adapter for your
convenience.)
The VBL/VBS series video transmitters from DTC represent the first true “video body wires” available. DTC has developed a
fully user programmable video transmitter and mated it with an integral AA battery pack. This dramatically simplifies wiring,
lowers the risk of detection, and increases the chances of operational success.
For best results, DTC recommends the use of its VidiWIRE on body dual patch antenna system with phase matching module,
and a DTC diversity receiver.
Users should also consider using the VBL/VBS series transmitters for rapid deployment drop cameras. Packaging the
transmitters with miniature board cameras is exceptionally easy, and in the case of 5 volt cameras, power may be provided to
the camera directly from the VBL/VBS transmitter’s internal battery pack.
This product in only available for sale to legitimate state, local, federal and friendly foreign government agencies.
