Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
43
Step 3
: Actions accordance with the instructions on screen then press
“
Enter/ OK
” button.
Step 4
: Press “
4
” or “
6
” button to increase or decrease Air/Fuel ratio. The
result displays “0” as below is standard Air/Fuel ratio. If is “+1” or “+2”
that is rich fuel mixture and is -1 or -2 that is lean fuel mixture.
3.8 ADJUST IDLE SPEED
Now, this function does not not support, please wait for the next version.
However, you can use “Adjust A/F” function to change Ralenti.
3.9 SET TPS ZERO POINT VALUE
Now, this function used for PIAGGIO PGM-FI/FI motorcycle. Next update, it
will support for other brands.
Step 1
: From the screen displays models of brand, select a model to set
TPS zero point
(Example: VESPA LX125 MIUG3)
. Press “
Enter/ OK
”
button, the screen displays function table.
Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
44
Step 2
: Press “
Shift Down and Up
” button to select “
SET TPS ZERO
POINT
” function in function table then press “
Enter/ OK
” button.
Step 3
: Actions accordance with the instructions on screen then press
“
Enter/ OK
” button.
3.10 SET OPERATION RANGE OF THROTTLE POSITION SENSOR
This function used to set value of Throttle position sensor when replace
sensor or ECM for PIAGGIO/ VESPA motorcycles
(ECM type: PGN04,
PGS02, PGT01, PGQ16).
Step 1:
From the screen displays models of brand, select a model to set
operation range of TPS
(Example: MEDLEY 125 PGQ16)
. Press “
Enter/ OK
”
button, the screen displays function table.
