Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
5
+ Synchronize SCU & ECM for all of cases
+ Inactivate FOB# code in SCU when lost FOB#
+ Check FOB# & SCU
+ Display status of KEY (ON/OFF)
+ Display SCU information
- Restore SCU data from sample data for HONDA (this function used to
repair software inside SCU when SCU data is fault)
- Copy data from source SCU to destination SCU for all motorbikes that
have Smart key system: HONDA, YAMAHA, SUZUKI (This function used to
repair, swap SCU when have SCU hardware/software fault)
- Quick sync SCU & ECM (without FOB) for HONDA: SH, PCX, X-ADV... and
equivalent vehicles
List of vehicle as below (include other models which use similar ECMS):
-
HONDA
: SH 125/150/125D/150D/SM, SH 300i ABS, PCX, SH MODE ,
LEAD, AIR BLADE, VISION, X-ADV, FORZA, SUPER CUB, SCOOPY ESP, X-
ADV, CLICK, VARIO
-
YAMAHA
: JANUS 125, NVX 125, NVX 155 Camo, NVX 155 ABS, AEROX,
LEXI S, NMX, NMAX, SMAX, TMAX, QBIX 125, QBIX 125 S, QBIX 125 ABS
-
SUZUKI
: GSX R150
2. Programming key immobilizer and get out immobilizer ID code
for PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI,
PEUGEOT, which use similar ECMs) that ECM types:
ACII, AC2I, AC5I,
AC8I, AC13I, AC13I, AC191, AC19I, AC20I, AC21I, AC23I, AC24I, AC25I,
AC27I, AC32I, AC5I, AC8I, ACI600, AC601, ACI602, ACI603, ACI604,
ACI605, ACI606, ACII, MIU1, MIU2, MIU G3/RIU1, MIU4,
PGN04/PGS02/PGT01
Reset immobilizer, register new key when lost all of the keys, register
additional keys … by many methods (KEY to IMMO. or IMMO. to KEY)
3. Correct and adjust value of digital odometer of HONDA, YAMAHA
(ODO)
(use with MOTOBOX)
- HONDA:
AIR BLADE 125, CBR 250, FUTURE NEO Fi, FUTURE X Fi, LEAD
125 (2013-2016), LEAD 125 (2017-2018), PCX (2008-2018),
SH 300i (2008-2015), SH 300i (2016-2017), SH 125/150/125D/150D/SM
(2013-2017), SH MODE (2013-2017), MSX, VARIO 150, WINNER, DYLAN,
WAVE 125 (Thailand), CLICK 125i (2013-2014), CLICK 125i (2015-2017),
SCOOPY-i
- YAMAHA:
NVX, JANUS, TFX, EXCITER 2019, ACRUZO, EXCITER, FZ 150,
FZ 150i, GRANDE, NOUVO SX, NOUVO LX, YZF-R3, R15
- SUZUKI:
RAIDER 150
Edit, decode odometer data and convert information automatically in
EEPROM
4. Programming ECM firmware
(use with MOTOBOX)
for:
- HONDA:
AIR BLADE 125, LEAD 125, SH MODE, VISION 110
- PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI,
PEUGEOT, which use similar ECMs):
ECM types are
AC19I/AC20I/AC24I/AC25I/ AC27I/AC32I, MIU G3/RIU1 and ECM
PGN04/PGS02/PGT01
Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
6
Initialize and repair data errors, upgrade the versions of MCU, EEPROM
5. Calibrate and set control parameters in the ECM:
- Calibrate air/fuel ratio (AFR): YAMAHA, PIAGGIO/VESPA (it also support
GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs), SYM
- Reset to manufacturer value of ECM: HONDA, YAMAHA, PIAGGIO/VESPA
(it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar
ECMs)
- Offset zero point value and set range of throttle position sensor for
PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which
use similar ECMs)
- Reset IACV: HONDA, YAMAHA, PIAGGIO/VESPA (it also support GILERA,
APRILIA, DERBI, PEUGEOT, which use similar ECMs), KYMCO
- Adjust pulse band width to control fuel injectors (Ti) and idle speed:
YAMAHA, SYM
- Create new and repair data errors, upgrade the version MCU, EEPROM
6. Check component fault inside ECM
(this is optional and use with
MOTOBOX)
Test quantity of ECMs for HONDA, YAMAHA, PIAGGIO/VESPA according to
the order
7. Simulate Input/Output signal of ECU to support diagnosing fault
and repair ECU hardware
(use with MOTOBOX)
FUNCTION 3: SPECIALIZED MEASURE TOOL
1. Fast measure and assess capacity, quality of battery
2. Reviewed charging status and rated the quality of the generator,
regulator
3. Measure the air/fuel ratio (A/F) to assess the instantaneous fuel
consumption
4. Measure engine speed (RPM) for all carburetor and PGM-FI/FI with DIY
ECU motorbikes
5. Emulate the signals on motorcycle for fault diagnosis, ECU hardware
repair
*
FUNCTION 4: INFORMATION WITH MOTODATA SOFTWARE
1. Show the current firmware version of ECM and ACU
2. Look up the acronym, position of signal pins for systems: ECM, SCU,
ACU, ODO, IMMO, SMART KEY
3. Look up electrical wiring diagram: principle diagram, schematic assembly
and specified conditions
4. Look up the process assembly, repair, maintenance mechanic, oil
warning lamp reset
5. Manage repair workshop: customer, financial, store, treasury, employees
6. Update version of data software and firmware via Internet
NOTES:
The advanced functions with an asterisk (*), you must purchase additional
MOTOBOX
