Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
69
If MOTOSCAN do not communicate with MOTOBOX or “
MT0006-LINK
”
cable is faulty or communicating between MOTOSCAN and MOTOBOX has
been lost synchronization then the screen displays as below:
If the memory card is faulty or do not have memory card in MOTOBOX then
the screen displays as below:
You need check memory card then contact to DTDAuto to be supported.
In case of the screen displays as below, you need contact to DTDAuto to be
supported and updated data.
Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
70
Step 7:
The screen display IC type of odometer.
Example:
IC
type is
93C66
. You must remove dashboard, determine
position of weld points on circuit board as guide image at MOTODATA
software :
You use solder machine to solder connectors of ODO cable with solder
points on circuit board of odometer then press “
Select/ OK
”
.
