D7 - Setup
ON the PC
：
1.
Attach the Antennae at the rear (as shown).
2.
Connect an Ethernet cable connected to PC port.
With all connections made
：
1.
Insert the power cord into the outlet.
2.
Arrange or dress cables using ties or tape
.
1
1
Etherne
t
Antenn
a
Antenn
a
The specifications and information regarding the products in this manual are subject to change without notice. Functionalities/Extend features depending on both Zoom Room Software and DTEN Firmware updates
DTEN. Confidential. The content of this presentation is proprietary and confidential information of DTEN. It is not intended to be distributed to any third party without the written consent of DTEN.
