1
SAFETY OF THE REALIZATION OF THE AUTOMATION SYSTEM
·
Do not leave materials from containers in the place accessible for children, they are potentially
hazardous;
·
This product was designed and produced only to use appropriately as described in this
documentation. Exploiting it in other purposes can negatively influence the technical condition
and operation of the device and is a potential threat;
·
DTM System company is not responsible for effects of the wrong usage, contrary to intended
purpose;;
·
Do not install the device in surroundings of increased explosion risk or with aggressive air;
·
Automatic gates should be compliant with norms as well as with every local applicable regulation,
they must meet requirements of EN12604 and EN12605;
·
DTM System company is not responsible for effects resulting from faults in the design of driven
elements or for their deformations which can appear while using;
·
The installation must meet the requirements of EN12453 and EN12445;
·
All power sources must be disconnected before beginning any works with the system;
·
The electrical installation, to which automation is being connected, must be compliant with
applicable standards and be made correctly;
·
The installer should deliver the RCD (residual-current device) with the device. It secures the break of
the electric circuit of the devices from the power supply. Standards require separating contacts for
at least 3 mm in every pole (EN 60335-1). It is advised to use 6A thermal fuse with the RCD of all
circuits;
·
Secure the power network with RCD of 30mA;
·
Safety mechanisms (EN12978 norm) ensure the protection against hazards associated with
moving of movable mechanical elements such as crushing, hitching or detachment;
·
DTM System company is not responsible for safe and efficient operation of the device in case of
applying components not being products offered by DTM System;
·
Use only original parts while servicing;
·
Do not alter or change the elements of the device;
·
Inform the end user of the manner of the service, dealing with breakdown and about threats
resulting from using the device;
·
Only appropriately trained adults can use the device;
·
Controlling devices must be out of the reach of children in order to protect the automation system
against accidental starting;
·
Only qualified personnel can perform the service;
Before commencing the installation carefully read the entire installation and service manual of the product.
Non-observance and not-abiding remarks with these symbols can lead to the accident resulting in injury of people or
material damage.
The driver ensures correct and safe operation only when installed and used according to the given
safety rules. DTM System is not responsible for accidents resulting from incorrect usage or non-professional
installation of the devices.
·
During the assembly or repair works, exercise caution, do not wear jewellery, watches or loose
clothes;
·
After installation it is necessary to check if the device is correctly set and if the controlling device,
security system operate correctly;
·
The systems protecting against crushing or injury (ex. photocell systems) must work correctly after
installing and connecting the drive to the network;
·
Radio remote control can be used only when a safe value of used power is adjusted;
·
Radio remote control can be used only when observation of the gate move is possible, and no
people are in the zone of the move and there are no objects placed;
OHS
Summary of Contents for SWIFT6
Page 2: ......
