6
Part 1: Assembly instruction
Part 1: Assembly instruction
.
Assembling the rack
1
2
Take out four pads from the packing case and attach the pad
with the hole on the backside on the rod. When you have
found a comfortable position for every pad please tighten the
wing screw.
3
Insert the module into the rack clamp on the middle tube and
tighten the wing screw.
4
Position the three cymbals in their places on the long rods
and tighten their wing screws.
To assemble the bassdrum you only need to insert the bea-
ter into the bracket and tighten the bolt with the included
wrench,
5
Take out the drum rack from the box, open the stand and
adjust every part as shown in the figure.
Take out four pads from the packing case and attach to the
rod mounts. When you have found a comfortable position
for every pad tighten the wing screws.
To assemble the bass drum you only need to insert
the beater into the bracket and tighten the bolt with the
included wrench.
