SLICE6 DAS
User’s Manual
June 2018
support.dtsweb.com
5
13006-90010-MAN (Rev. 0)
Introducing the SLICE6 DAS
The SLICE6 DAS is an ultra-small, low-power, high-shock-rated, data acquisition system
ideal for in-dummy and test applications with tight space constraints. Each unit contains a
system microprocessor, flash memory for data storage, PTPv2 Ethernet communications
support, and 6 analog sensor input channels supporting conventional bridge (piezo-resistive
and voltage) sensors, each with isolated excitation, high impedance differential input
amplifier, and automatic sensor identification circuits. Units can be interconnected (daisy-
chained) via the communication bus connector.
•
Sample rates up to 400,000 sps on 6 channels simultaneously.
•
Shock rated to 2000 g for dynamic testing environments.
•
6-channel analog sensor interface supports accelerometers, load cells, pressure
sensors, strain gage and piezo-resistive bridges, and voltage inputs.
•
Thermocouples, 1/4 bridges and other sensor types are supported with adapters as
needed.
•
LED indicator for system status.
•
Ethernet PTPv2 communications (IEEE1588) and sensor ID easily support test set-
ups daisy-chaining hundreds of channels.
Connector information, pin assignments and mechanical specifications can be found in
Appendix A. Common sensor wiring schematics are shown in Appendix B. Please see your
packing list for your hardware’s specifications.
Sensor Interface
The SLICE6 DAS supports 6 sensor measurement channels and is available with a single
connector that supports all sensor signals. See Appendix A for sensor connector pin
assignments.
Sensor interface
connector
Communication bus
Sensor alignment
guide pins
Summary of Contents for SLICE6 DAS
Page 20: ......