3.
LFE is set to ON. See Table 1, page 11.
4.
Sample rate is set to 48 kHz. The Sample rate here must match the sample
rate of the source files. See
note 1,
after step 12, page 10.
5.
3 dB Rear channel attenuation is left OFF.
3 dB rear channel attenuation is used in cases where you have a theatrical
master that has not been remixed or repurposed for DVD, and the rear
surrounds (right and left) are typically 3 dB higher than they should be for
home theater.
6.
Mode: the only option is Local, meaning the output file will be placed on your
local computer.
Next, determine the location for the output packed file. The Browse button
will open a Select Output Directory window that you can use to navigate to
the correct directory.
7.
Identify the directory where the output files will be located. Click Browse and
navigate to the
parent
1
of the desired directory. Click the target directory
name to select it, then click
Select.
8.
Type a name for the packed file that you will make.
9.
(Optional) Add your company name, project name, or other details here.
1
Parent = the next higher directory
DTS Pro Series Surround Encoder
– Installation and User Manual
8
