TDAS G5 DAS
User’s Manual
October 2019
7
11000-00010-MAN (Rev. 5)
TDAS G5 DAS Interface Connector
All functions and signals enter and exit the TDAS G5 DAS via the gold-plated, 216-
position interface connector panel. The connector panel should be treated with great
care as any debris, solvents, or oil (even from fingers), can compromise the integrity of
the connections/signals.
Proper orientation can be determined by locating the board references J1-J18
—
these are
at the bottom of the panel, closest to sensor channels 17-32. Pin assignments can be
found in Appendix A.
WARNING:
Do not apply external voltages to the event, communication,
status or control output and inputs
—
this could result in damage
to the unit.
