How to prepare the record player for operation
10
How to prepare the record player
for operation
è
Before assembly, make sure the accessories are
complete.
è
Assemble the dust cover at the very end, to make it
more convenient for assembling and adjusting the
system!
è
Put the record player on a stable, vibration-free and
horizontal surface.
è
Place the record player as far away as possible from
the loudspeakers and keep it isolated from the sound
they produce, to minimise vibrations.
Belt and turntable
Turntable
è
Carefully set the turntable onto the turntable
spindle
4
.
The drive belt
A
is delivered already seated on the belt
contact surface of the turntable
2
. The belt is equipped
with a clip
B
with which the belt is laid onto the drive axle
C
of the motor pulley.
è
Set the turntable onto the axle.
è
Turn the turntable until the cut-out stands over the
drive motor. Then the brass-coloured drive roller is
visible.
è
Use the clip
B
described above to pull the belt
A
off
of the contact surface and lay it centrally over the
drive roller
C
of the motor pulley.
è
Remove the clip
B
.
B
C
A
