XDVD700
OPERATION
31
AM/FM Tuner Mode
Band
Manual Tuning
Seek Tuning
Preset Scan
Scan Tuning
Local Tuning
From the main menu, touch TUNER icon to select AM/FM Tuner mode.
From the remote control or the front panel:
Press
MODE
until TUNER is displayed on the screen.
Touch
on the screen repeatedly until the desired band is displayed, FM-1,
FM-, FM-3, or AM.
Press the
BAND
button to switch between bands, FM-1, FM-, FM-3, AM.
From the remote control:
Press the
BAND
button.
Touch
on the screen to tune to the next higher frequency step.
Touch
on the screen to tune to the next lower frequency step.
Touch and hold either
or
on the screen to continue tuning across
multiple stations.
From the remote control:
Touch
or
to perform manual tuning.
Touch
on screen to tune to the next higher strong station.
Touch
on screen to tune to the next lower strong station.
Press
on front panel to tune to the next higher strong station.
Press
on front panel to tune to the next lower strong station.
From the remote control:
Press
or to tune to the next higher strong station.
Press
or to tune to the next lower strong station.
Touching the
PS
button will scan through all presets in the current band and
play them for 10 seconds each.
Press the
AS/PS
button momentarily.
Touch
SCAN
on the screen and it will tune you to all stations available with good
reception for 10 seconds at a time. Touch
SCAN
again to disable.
Local tuning lets you tune in radio stations with sufficiently strong signals for
good reception. In areas that reception is poor, you can switch from local to
distance tuning by touching the
DX/LOC
button on the screen.
AM/FM Tuner Operation
