XGPS170
10
Pairing with your device
When powered on, the XGPS170 will automatical-
ly try to reconnect to the last device(s) it was paired
with. Keep this in mind when trying to use it with
multiple devices: if you are having trouble getting
another device to recognize the XGPS170, make
sure the last device you used with the XGPS170 is
turned completely off or is out of Bluetooth range.
However, in order for the XGPS170 to automati-
cally reconnect, the other device(s) must already
be turned first. So it is a good habit to turn on
your tablet/smart phone first, then turn on the
XGPS170.
If the Bluetooth connection is interrupted while
communicating, either because a device is turned
off or because the distance between the two de-
vices is too great, you must turn the XGPS170 off
and back on in order for it to automatically recon-
nect. Alternatively, you can go into your device’s
settings menu and manually reactivate the link.
NOTE: Activating Airplane Mode on the iPad/
iPhone/iPod (which is recommended when flying)
automatically turns off Bluetooth, so it must be
manually turned back on. The recommended
procedure with the iPad/iPhone/iPod is to activate
Airplane Mode, turn Bluetooth back on and then
turn on the XGPS170.