XGPS170
8
Step 1)
Remove the rubber cap on the front side
of the XGPS170 to expose the antenna connector.
Attach the included ADS-B antenna, or connect an
external non-amplified antenna using a high qual-
ity shielded coaxial cable.
Step 2)
Move the Mode switch on the XGPS170 to
the setting for the type of device you will be using.
Step 3)
Pair the XGPS170 to your iPad or Android
tablet (see
Pairing with your device
below). The
XGPS170 will work with up to two iOS or Android
devices simultaneously, but not one of each kind.
Step 4)
Position the XGPS170 on the glare shield
or affix it to a window using the included non-slip
pad.
Step 5)
Download the free
ADS-B Status Tool
app from the iTunes App store. This app will give
you information about your XGPS170, such as
battery level, charging status and GPS reception
status.
PLEASE NOTE: The XGPS170 is intended to be
used with popular EFB apps. A current list of com-
patible EFB apps is available on the web at http://
xgps170.dualav.com.
Step 6)
Open a compatible EFB app and confirm
that the app is receiving data from the XGPS170.
Please see the help section of your preferred EFB
Setup