XGPS170
9
app for answers to specific questions about using
the XGPS170 with that app.
Non-slip pad
The included non-slip pad is designed to hold the
XGPS170 securely in place on most surfaces.
The XGPS170 can be inserted into the pad with
the red dot facing up (when using the pad on flat
surfaces) or facing down (when using the pad on
a window).
When inserting the XGPS170 into the pad face
down, ensure that the red disc on the top of the
XGPS170 lines up with the hole in the bottom of
the pad.
If the bottom of the pad looses its stickiness from
an accumulation of dirt/dust, simply wash the pad
with warm water and a mild soap and allow the
pad to air dry.
Important note about heat
The XGPS170 has been designed to work at high
temperatures, and it is normal for the XGPS170
to become noticeably warm to the touch when
operating. It will also absorb additional heat from
the direct sun or when sitting on a hot glare shield
so
please use caution when handling the
XGPS170 after it has been running in the direct
sun because it may be hot
.