10
SERVICING
•
E. Note the position of the
connecting links and wires, then
unscrew nuts which secure them
to the broken element, bend back
the connecting links, pull out the
old element and slide in the new
element. Fasten connecting links
back to their original position by
tightening the nuts.
•
F. Slide back element retaining
strip and tighten nuts.
•
G. Make sure that you have the
high wattage elements marked
'CENTRE" or low wattage
elements marked "END". Different
toasters have different element
configurations, if you are unsure
please call the dualit helpline on
01263 652 500
•
H. Refit base plate, feet and
crumb tray.
In the unlikely event of the toaster
failing within 2 year or your
heating elements within 5 years from
date of purchase, Dualit will repair or
replace it free of charge, provided:
•
you have not misused, neglected
or damaged the part;
•
the appliance has not been
modified;
•
a receipt is supplied showing
where and when the toaster
was purchased.
This guarantee does not affect the
purchaser’s statutory rights.
Further advice on using your Dualit
toaster, or other products in the
Dualit range, is available from:
Dualit customer care line on
+44(0)1293 652 500
Alternatively e-mail Dualit on
info@dualit.com or www.dualit.com
Spares for your Dualit toasters are
available by mail order, call us on
01293 652 500 for more details.
•
Servicing must only be carried
out by Dualit authorised service
agent or a competent electrician.
•
For your own protection only use
original Dualit spares in your
toaster.
•
When replacing Pro Heat
elements, only use genuine Dualit
elements (stamped "DUALIT") the
safety and the performance of the
toaster cannot be guaranteed if
inferior elements are used. Fitting
of non Dualit parts will also
invalidate the guarantee.
•
A. Disconnect toaster from mains.
•
B. Remove the crumb tray.
•
C. Unscrew feet and remove base
•
D. Loosen the two nuts and slide
back element retaining strip.
REPLACING PROHEAT ELEMENTS
GUARANTEE
Bun toaster template.qxp 14/03/2007 10:08 Page 10
