1
2
3
4
5
Unplug and place toaster on
a soft cloth. Remove crumb
tray and unscrew feet
to remove the base plate.
Bend brass links and wires
away from the element.
Unscrew retaining plates
either side of the element.
Lift up to remove the plate.
Remove element. To re-assemble, reverse procedure
ensuring wires and parts are correctly positioned. Ensure
new element is marked the same as the one removed and
is seated correctly in the channels either side.
PAT test before use.
Unscrew brass links and
wires using a 6mm spanner
and screw driver.
REPLACING ELEMENTS
ALL SERVICING MUST BE CARRIED OUT BY A QUALIFIED
ELECTRICIAN OR REPAIRER & PAT TESTED.
REPLACEMENT PARTS
The Catering Pop Up toaster is also kind on the
environment, all parts are repairable or replaceable, you
don’t throw away a Dualit Catering Pop Up toaster, for a
nominal cost we fix it for you!
Dualit repairs department regularly receive toasters over
40 years old. They are fixed and go back to the owner in full
working order. If your toaster needs a repair, simply
contact our helpline on 01293 652 500 for repair or
servicing advice.
ALL SERVICING MUST BE CARRIED OUT BY A
QUALIFIED ELECTRICIAN OR REPAIRER.
For your own protection only use original Dualit spares in
your toaster.
• When replacing ProHeat elements, only use genuine
Dualit elements (stamped “DUALIT”).
•
The safety and the performance of the toaster cannot be
guaranteed if inferior elements are used.
•
Fitting of non Dualit parts will also invalidate the
guarantee.
12
13
IB-DCP4-A_14.02.11_Layout 1 14/02/2011 12:52 Page 12
