DO NOT ADJUST THE HEAT SETTINGS
WHEN MAKING TOAST, ANY
ADJUSTMENT REQUIRED SHOULD BE
MADE WITH THE SPEED CONTROL
ONLY.
3. My conveyor is overheating?
a)
If the conveyor belt continues to run
and the elements have cut out, check the
cooling fan is running and free of dust
and dirt as the heat limit switch may have
tripped.
If the fan is dirty, isolate from the power
and clean with a soft brush, leave for ten
minutes for the toaster to cool and push
the reset button to begin toasting again.
(Allow time for the toaster to heat up
again)
b)
The toaster will also overheat if the
crumb tray is not in position when in use.
This acts as heat screen and helps protect
the internal components vital to the
running of the toaster.
c)
Allow a clearance of 80mm from the
rear of the machine and 30mm gap
between machines if two or more
machines are placed next to each other.
4. My bread is getting stuck inside
the toaster?
a)
Ensure the thickness of the bread is no
thicker than 30mm or it will get stuck and
may cause fire.
5. Where do I position the conveyor
toaster?
a)
Ensure there are no shelves or units
directly above the conveyor.
b)
Allow ample clearance around the
conveyor, minimum 80mm at rear and
30mm at sides. This ensures air can
circulate around the conveyor and keep it
at optimum operating temperature.
c)
Do not cover or obstruct the fan.
6. My elements have gone white?
a)
Dualit conveyors use silica glass tube
elements. These may go white over time.
Deposits of starch from the bread may
build up on the element. This in not
harmful in any way nor does it effect the
toasting performance.
5
If your conveyor toaster fails within one
year from date of purchase we will repair
or replace it free of charge, except for the
elements, provided:
•
You have not misused, neglected
or damaged it.
•
It has not been modified.
•
You supply your receipt to show
when you bought your toaster.
Elements are guaranteed for 3
months from date of purchase for
parts & labour, thereafter parts only.
The guarantee does not affect your
statutory rights.
If over one year, contact Dualit for
recommended repair agents.
Further advice on using your Dualit
conveyor toaster and other products in
the Dualit range is available from:
Dualit CareLine: +
+4
44
4(
0) 1293 652 500
(09:00 to 17:00 Monday to Friday)
Or email us on
info@dualit.com
UK AFTER-SALES SERVICE
TROUBLESHOOTING
