1st
2
n
d
3rd
CLICK
9
8
BLADES & SPINDLE
CAUTION BLADES ARE VERY SHARP. WITH THE EXCEPTION OF THE
CHOPPING BLADES, ATTACHMENTS MUST BE USED WITH THE SPINDLE.
PROCESSING BOWLS & LID
IF THE PROCESSING BOWL AND COVER ARE NOT CORRECTLY
ASSEMBLED, THE FOOD PROCESSOR WILL NOT FUNCTION.
Before you assemble the
food processor, ensure that
the power cord is unplugged,
and placed facing you on a
dry, level surface. Push down
on the body to secure firmly.
Place the large bowl onto
the main body, with the
handle pointing to the right
(4 o’clock).
Hold the handle and turn it
clockwise until you hear and
feel it lock in place.
1
2
3
POSITION BODY
LARGE BOWL
LOCK LARGE BOWL
1
ADDITIONAL
BOWLS
When using the medium
bowl, insert this into the
large bowl; it will self-locate.
If using the optional small
bowl, place this into the
medium bowl.
2
ATTACH THE LID
To attach the lid, place it on
the large bowl aligning to
the slots on the bowl rim.
3
LOCKING THE LID
Hold the large bowl handle
with one hand, with your
other hand, hold the base of
the feed tube and rotate
clockwise to lock.
Handle blades and
attachment using only the
centre plastic section. The
large chopping blade locates
directly onto the bowl drive,
once the large bowl is
locked in place.
The medium chopping blade
also locates directly onto the
bowl drive, once both large
and medium bowls are in
place.
The small chopping blade
needs to be used with the
spindle. This must be
attached to the bowl drive
once the large and medium
bowls are in place.
1
2
3
LARGE BLADE
MEDIUM BLADE
SMALL BLADE
1
SPINDLE IN
LARGE BOWL
The drive shaft locates on
the bowl drive on the large
processing bowl.
1st
2
n
d
2
SPINDLE IN
MEDIUM BOWL
When using the medium
bowl, place the medium
bowl in the large bowl then
the drive shaft on the bowl
drive.
3
SPINDLE IN
SMALL BOWL
When using the optional small
bowl with blade, place in the
large bowl with medium bowl,
drive shaft in position, then
place the small bowl & small
blade on the drive shaft.
IB-DMP1-C_Layout 1 15/03/2011 11:55 Page 8
