13
E
LCD unit functions
When turning the key from
OFF
to
ON
(
Key-ON
) the
instrument panel carries out a Check of the whole
instruments: indexes, displays and pilot lights (fig. 5 and fig.
6).
LCD (1)
Turn the key to
ON
and press (A, fig. 6) to display trip meter
and odometer alternatively and, if fuel reserve light is on, to
display mileage covered since reserve tripped on (trip fuel
function).
Resetting the trip meter
Keep (A, fig. 6) pressed for more than 2 seconds. When the
TRIP
function is enabled (trip meter), display (LCD 1) will
reset.
LCD (2)
Turn the key to
ON
and press (B, fig. 6) to display clock and
oil temperature.
Setting the clock
Press (B, fig. 6) for at least 2 seconds to see the clock on
display (2, fig. 6).
Press (A, fig. 6) to set AM/PM. Press (B) to set hours. Use
button (A) to change hour value. Press (B) to set minutes.
Press (A) to increase the value. Keep the button pressed for
more than 5 seconds to proceed faster. Press (B) to quit this
function.
x1000
min
Km/h
-1
OFF
fig. 5
CHECK
1
A
B
2
fig. 6
Summary of Contents for MONSTER 400
Page 1: ...1 E Owner s manual 400 ...
Page 2: ...2 E ...
