29
ENGLISH
L2003212 Installation guide for DucoBox Energy Comfort (Plus) (Revision A | 18.10.2022)
09.B
Change ventilation position
The ventilation position can be changed via the display menu or via one or more external controls (optional)� The display menu and
any external controls will always show the same position�
Ventilation positions
AUTO
Automatic setting
(= recommended)
The system ventilates on a low number of revolutions and will only accelerate if needed� This guarantees
an operation that is as energy-economical as possible� Accelerating occurs based on CO
2
and/or humidity
measuring (if sensors are installed) or based on a pre-set time programme (see page30)�
Low
The system exhausts at 10% of maximum capacity�
Medium
The system exhausts at 50% of maximum capacity�
High
The system exhausts at 100% of maximum capacity�
Changing the ventilation position via the unit
The DucoBox Energy Comfort (Plus) has the option to view and change the ventilation position via the display menu� For this pur-
pose, the following settings must be activated:
SETTINGS
→
UNIT CONTROL
(standard =
ON
)� If this option is active, the main screen
will show the ventilation position (see page 28) and using the arrow keys ( / ) will enable changing the ventilation position�
Open the menu via enter ( )�
The selected ventilation position on the unit is permanent (indicated in purple in ‘Controls’) until the user activates another posi-
tion� Control is needed if you want to set temporary manual positions� DUCO recommends the
AUTO
position for an optimal and
energy-efficient operation�
09.C
Settings for the resident
The following settings can be adjusted by the occupant:
Date & time
During the initial installation, carried out by the installer, the date and
time will be set correctly� Every DucoBox Energy Comfort (Plus) will
remember the date and time for a number of hours after a power cut�
If the date and time have nevertheless been set incorrectly, they can be
corrected manually via the menu�
The date and time will synchronise automatically if the DucoBox Ener-
gy Comfort (Plus) is equipped with a Communication Print WIFI and the
DucoBox Energy Comfort (Plus) is connected to a computer network
with internet access� If this is not the case, the date and time can be
set by the following method�
Setting date & time
1
Go to
SETTINGS
→
DATE & TIME
�
2
Change the hours by pressing the or
button and press
enter
( ) to confirm�
3
Change the minutes by pressing the or
button and press
enter
( ) to confirm�
4
Change the day, month, year and time zone
in the same way� Date and time are now set
correctly�
