background image

32

ENGLISH

L2003212  Installation guide for DucoBox Energy Comfort (Plus) (Revision A  |  18.10.2022)

09.E 

Menu structure

The chart below contains all the menus in the DucoBox Energy Comfort (Plus)� Menus with a padlock ( ) are only visible to the 

installer after entering the installer’s code 

9876

The chart below may differ depending on the DucoBox Energy Comfort (Plus) software version�

SETTINGS

COMFORT TEMPERATURE

The DucoBox Energy Comfort (Plus) will seek to maintain the temperature 

in the house at the set value� The DucoBox Energy Comfort (Plus) also 

features a smart algorithm which will automatically adjust the comfort 

temperature depending on the outdoor temperature� This will maintain 

the temperature in the house at the most comfortable level possible for 

the resident�
With zoned control, a comfort temperature can be set for each zone�

UNIT CONTROL

Option to change the ventilation position via the display menu

PROGRAMME

A set timetable can be programmed into the ventilation unit� You can use 

this to increase or decrease the ventilation in the house at fixed times�

BYPASS

The DucoBox Energy Comfort (Plus) features a fully automatic bypass� This 

enables the house to cool down to the desired comfort temperature during 

summer nights� It is also possible to deactivate the bypass temporarily or 

completely to increase user comfort�

DATE & TIME

The DucoBox Energy Comfort (Plus) has an inbuilt clock which is required 

for the time-dependent controls�

LANGUAGE

The menu language can be changed to match the user’s language� The 

following languages are available: Dutch, English (standard), French and 

German�

LAN SETTINGS

Platform where LAN settings can be defined� Only active when a 

Communication Print WIFI is connected, AND there is a positive response 

to the IP address query�

MODBUS

 

Platform where ModBus settings can be defined� Only active when a 

Communication Print WIFI is connected, AND there is a positive response 

to the ModBus address query�

CONFIG

 

Other settings�

FROST PROTECTION

 

Status of frost protection: 

STAND-BY

 or 

ACTIVE

 See also page 31� Other 

settings such as 

HEATER

 

AUTO

 or 

OFF

 

HEATER

 

EXT

 (pre-heater) 

ABSENT

 or 

PRESENT

NIGHTBOOST

 

Activate or deactivate and set parameters of the nightboost function�

BUILDING TYPE*

 

Selection of the parameter 

HOUSE

 (landed) or 

FLAT

 (non-landed)�

INFO

TEMPERATURE SENSORS

 

(for information)

The DucoBox Energy Comfort (Plus) features 4 temperature sensors which 

measure the temperature at each duct connection� The values of these 

temperature sensors are indicative�

PRESSURE SENSORS

 

 

(for information)

The pressure measured in the unit relative to the atmosphere� These 

values give an indication about the performance of the system calibration�

BOX SENSORS

 

 

(for information)

Measured values for Humidity Boxsensor�

ERROR LIST

Overview of error messages and/or warnings�

DUCO SERIAL NUMBER

 

(for information)

Serial number of the DucoBox

SOFTWARE VERSION

 

(for information)

In any communication with DUCO, you may be asked to state the software 

version of your DucoBox Energy Comfort (Plus)� Please keep this number 

to hand for any communication�

SOFTWARE UPLOAD

All components in the network can also receive a software update via the 

DucoBox� The 'Software update' selection field can be used to read out the 

percentage status of the update of these components�

SERVICE CODE

This code will enable the DUCO service team to read out the composition 

of your ventilation system and its paired components�

UNIT INFO

 

(for information)

In any communication with DUCO, you may be asked to provide unit details 

such as correct name, type, country setting�

FILTER

FILTER STATUS

Remaining filter service life�

REPLACE FILTERS

Step-by-step instructions for replacing filters�

FILTER CLEANING

Step-by-step instructions to clean the filters�

INSTALLATION

 

WIZARD

 

Run this wizard to pair components with the system�

RESET NETWORK

 

This removes all paired control components from the network�

FACTORY RESET

 

Resets the entire system (= DucoBox Energy Comfort (Plus) + paired 

components) to factory settings� The calibration will be lost�

CALIBRATION

 

WIZARD

 

Run this wizard to calibrate air flow rates correctly�

VERIFY HIGH LEVEL

 

Sets the system temporarily to high level to enable calibrated air flow 

rates to be verified� Active only if adjustment has been carried out�

CALIB BY CODE

 

To copy the adjustment of an existing system, a code can be requested or 

read in�

ADVANCED

 / 

CLOSE ADVANCED

 

Activate / deactivate advanced mode to show / hide functions with a padlock ( )�

* Only if at the first start-up, when choosing the country, “the Netherlands” was 

selected�

Summary of Contents for 0000-4649





































Reviews: