14
ENGLISH
L2000012 Installation guide for DucoBox Eco (Revision E.1 | 13.05.2020)
05.F
Fit control valves
A control valve must always be installed in the DucoBox Eco (i�e� in a 1-zone system too)� The diameter of the control valves is
160 mm� Please refer to the ‘Versions’ chapter for types available�
Iteration
Rev. Date
Name
Description
23-May-18
Status Date
Status
MONTAGE_MUUR_ECO
mm³
dm²/m
kg/m
mm
Handelsstraat 19 - 8630 VEURNE
tel. 0032-58/330033 - fax.0032-58/330044
email: info @ duco.eu www.duco.eu
This drawing is property of Vero Duco NV and can not be copied, neither shown to
third party/externally without written permission.
0.000
0.000
Drawing Number
Volume
Coat. Surf.
Weight
Outline
MONTAGE_MUUR_ECO
Format: A0
Production Number:
Mat.:
Draftsman: -
Tol.: -
Scale: 0.150
-
Date: 23-May-18
1-Zone
2-Zone
Remove the printed circuit board
green housing on top of the unit�
See chapter “05�C Removing prin-
ted circuit board housing” for this�
1
Iteration
Rev. Date
Name
Description
23-May-18
Status Date
Status
MONTAGE_MUUR_ECO
mm³
dm²/m
kg/m
mm
Handelsstraat 19 - 8630 VEURNE
tel. 0032-58/330033 - fax.0032-58/330044
email: info @ duco.eu www.duco.eu
This drawing is property of Vero Duco NV and can not be copied, neither shown to
third party/externally without written permission.
0.000
0.000
Drawing Number
Volume
Coat. Surf.
Weight
Outline
MONTAGE_MUUR_ECO
Format: A0
Production Number:
Mat.:
Draftsman: -
Tol.: -
Scale: 0.150
-
Date: 23-May-18
1-Zone
2-Zone
Fit the front cover and the green
printed circuit board housing back
onto the DucoBox Eco�
6
Iteration
Rev. Date
Name
Description
23-May-18
Status Date
Status
MONTAGE_MUUR_ECO
mm³
dm²/m
kg/m
mm
Handelsstraat 19 - 8630 VEURNE
tel. 0032-58/330033 - fax.0032-58/330044
email: info @ duco.eu www.duco.eu
This drawing is property of Vero Duco NV and can not be copied, neither shown to
third party/externally without written permission.
0.000
0.000
Drawing Number
Volume
Coat. Surf.
Weight
Outline
MONTAGE_MUUR_ECO
Format: A0
Production Number:
Mat.:
Draftsman: -
Tol.: -
Scale: 0.150
-
Date: 23-May-18
1-Zone
2-Zone
Fit the valve for zone 1 on the left-
hand side of the unit� Connect it
to the IN connector with the cable
provided�
4
Iteration
Rev. Date
Name
Description
23-May-18
Status Date
Status
MONTAGE_MUUR_ECO
mm³
dm²/m
kg/m
mm
Handelsstraat 19 - 8630 VEURNE
tel. 0032-58/330033 - fax.0032-58/330044
email: info @ duco.eu www.duco.eu
This drawing is property of Vero Duco NV and can not be copied, neither shown to
third party/externally without written permission.
0.000
0.000
Drawing Number
Volume
Coat. Surf.
Weight
Outline
MONTAGE_MUUR_ECO
Format: A0
Production Number:
Mat.:
Draftsman: -
Tol.: -
Scale: 0.150
-
Date: 23-May-18
1-Zone
2-Zone
Remove the front cover by unscre-
wing the 4 Allen bolts� Use an Allen
key (not included) for this�
2
Iteration
Rev. Date
Name
Description
23-May-18
Status Date
Status
MONTAGE_MUUR_ECO
mm³
dm²/m
kg/m
mm
Handelsstraat 19 - 8630 VEURNE
tel. 0032-58/330033 - fax.0032-58/330044
email: info @ duco.eu www.duco.eu
This drawing is property of Vero Duco NV and can not be copied, neither shown to
third party/externally without written permission.
0.000
0.000
Drawing Number
Volume
Coat. Surf.
Weight
Outline
MONTAGE_MUUR_ECO
Format: A0
Production Number:
Mat.:
Draftsman: -
Tol.: -
Scale: 0.150
-
Date: 23-May-18
1-Zone
2-Zone
With a 2-zone system: fit the valve
for zone 2 on the right-hand side
of the unit� Connect it to the zone 1
(OUT) valve cable to the zone 2 (IN)
valve�
With a 1-zone system: blank off
the unused duct with the blanking
cap�
5
Iteration
Rev. Date
Name
Description
23-May-18
Status Date
Status
MONTAGE_MUUR_ECO
mm³
dm²/m
kg/m
mm
Handelsstraat 19 - 8630 VEURNE
tel. 0032-58/330033 - fax.0032-58/330044
email: info @ duco.eu www.duco.eu
This drawing is property of Vero Duco NV and can not be copied, neither shown to
third party/externally without written permission.
0.000
0.000
Drawing Number
Volume
Coat. Surf.
Weight
Outline
MONTAGE_MUUR_ECO
Format: A0
Production Number:
Mat.:
Draftsman: -
Tol.: -
Scale: 0.150
-
Date: 23-May-18
1-Zone
2-Zone
Remove the pink transit packaging
from the top of the unit�
3