■
Additional pulley on the B riser, minimalizing drag during speed-system
operation.
■
Trimmers of red band with visible scale, designed for quick
and easy replacement in case of deterioration.
■
PA (Power Attack) system – combines the trimmers with
regular speed system, so that pushing your speedbar
automatically and simultaneously releases the trimmers.
■
Multiple pulley positions, to be used depending on the hangpoint level.
■
TCL (Tip Control Line) allows for heading adjustments
and turns even at high speed, without distorting reflex
profile too much. Steering is done with dedicated red
line, fixed to the corresponding stabilo steering line.
■
TST - (Tip Steering Toggle) additional mini handles for
stabilo steering, connected to TCL line.
■
TEA -
(
Torque Effect Adjuster
)
– allowing for
eliminating the effect of engine torque, tending to turn
the paraglider in the direction opposite to the
propeller's rotation. The system can be adjusted to
match your specific combination of paramotor/propeller.
For quick and easy recognition in emergency, some of the risers are
distinguished with coloured band as follows:
A
- red (ELR riser used for launching)
A'
- black neoprene (used for big ears)
B
- yellow (used for B-stall)
D
- blue (needed to keep the glider down in strong wind – aborted
launch).
Main A row suspension lines connect to an A riser (red) and A' (black
neoprene). B row and stabiliser lines go to B riser (yellow), C lines to C riser
(black neoprene) and D lines to D riser (blue), as well as steering lines
(through their pulleys).
Brake handles are attached to the steering lines at optimal point,
guaranteeing safe and effective operation. On adjusting the steering lines
see chapter 3.
Our sports steering handle for Snake XX, besides its attractive, light design,
features:
■
a swivel – preventing possible twisting of the steering
line,
■
soft neoprene cover TCT,
■
EK (Easy Keeper) system – see further pages
9
Summary of Contents for Snake
Page 1: ...u s e r m a n u a l...
Page 40: ...40...
