background image

2

This appliance complies with the following Directives: 

EEC 2009/142/CE (Gas)  

 

 

EEC 2004/108/CE (Electromagnetic Compatibility) 

EEC 2006/95/CE (Low Voltage)  

 

EEC 2004/1935/CE (Contact with foods)

- The installation must be carried out by experienced and qualified personnel, in conformity with the 

regulations in force.

- This appliance is not intended for use by person (including children) with reduced physical, sensory or 

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 

instruction cencerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.
- While the appliance is running, watch the children and make sure they neither stay near the equipment, 

nor touch the surfaces that have not cooled down completely.

- Before powering the equipment, check that it is properly adjusted for the type of gas at disposal (see the 

“installation” paragraph).

- Before carrying out the maintenance or cleaning the equipment, cut power supply off and make it cool 

down.

- Make sure that air circulates around the gas equipment. Insufficient ventilation produces a lack of oxygen.
- In case of an intense or prolonged use of the equipment, it may be necessary to improve aeration, for 

example by opening a window or increasing the mechanical suction power, if it exists.

- The products of combustion must be discharged outside through a suction hood or an electric fan (see the 

“installation” paragraph).

- For any possible operation or modification, apply to an authorized Technical Assistance Centre and 

demand original spare parts.

GENERAL NOTICE

We invite you to read this instruction booklet carefully, before installing and using the equipment. 

It is very important that you keep this booklet together with the equipment for any future 

consultation.

If this equipment should be sold or transferred to another person, make sure that the new 

user receives the booklet, so that he can learn how to operate the appliance and read the 

corresponding notice. This is a Class 3 appliance

The manufacturer refuses all responsibility for possible damages to things or people, resulting 

from a wrong installation or from an improper, incorrect or unreasonable use of this equipment.

WARNING !!!!

-  DO NOT USE

 speakers, toaster, iron griddles or grids 

    for stainless steel meat on gas burners.

-  

USE ONLY

 pots as described in

    

"USING THE BURNERS"

 paragraph.

Summary of Contents for G02-M1












Reviews: