Domino
DFDALI
Global Settings
In this TAB, Figure 5, it is possible to set, for all ballasts on
the DALI line, the following parameters:
MIN
: minimum brightness value (%); enabling the Reset
check box, the default value will be restored (1%).
MAX
: maximum brightness value (%); enabling the Reset
check box, the default value will be restored (100%).
BUS F.
: the brightness value (%) to be recalled by ballasts
during failure of
Domino
and/or DALI bus.
Ramp
: the ramp value in seconds.
Preset
: writing a value (0 to 100) and clicking on the button
on the right side, the brightness will be forced to that value.
M1
÷
M16
: the value to be loaded into the 16 presets; the
button on the right side allows to recall the related preset
stored into the ballast.
DUEMMEGI
s.r.l. - Via Longhena, 4 - 20139 MILANO
Tel. 02/57300377 - Fax 02/55213686 –
www.duemmegi.it
Rel.: 2.1 May 2013
Page 8 of 11
HOME AND BUILDING AUTOMATION
Figure 5: Global Setting
Figure 6: Status
