Short Seam Automat 2211-5 Working Instructions
- D 90 -
Beisler Automated Sewing Equipment
D.3
Programming
D.3.8 List of special parameters
No.
Programmable special parameters in lists (F3)
17
TACKING LENGTH SEAM END:
Final bar tack length only for lock stitch
18
STITCH LENGTH SEAM BEG:
Stitch length at beginning of seam (input 5.0 mm max.)
19
DISTANCE OF THIS ST.LEN:
Distance of stitch length at beginning of seam
24
ST.LENGTH OF MAIN SEAM:
Stitch length for main seam (input 5.0 mm max.)
25
STITCH LENGTH SEAM END:
Stitch length at end of seam (input 5.0 mm max.)
26
DIST.OF THIS ST.LENGTH:
Distance of stitch length at end of seam
27
ST.LENGTH TRIMM.STITCH:
Stitch length of cutting stitch (input 5.0 mm max.)
28
CHOICE OF TRIMMING ST.:
Cutting stitch
Input 00: Last stitch forward
Input 01: Last stitch rearward
30
START MODUS ..........:
Start mode preselection
31
LAMP/CURVE CODE:
On: 01
Off: 00
32
BLOWING MODUS ........:
Blowing, mode
Input 00: Alle nozzles off
Input 01: Nozzle for blowing off sewing pieces switched on
33
PUSH RETAINER MODUS:
On: 01
Off: 00
34
SWING RETAINER MODUS:
On: 01
Off: 00
37
ADDITIONAL TRANSPORT SECTION:
section of additional transport traverse path
38
ADDITIONAL TRANSPORT SYNCHRONIZING:
ratio of speed to main clamp
adjustment range: 75% to 125% (synchronious at 120%)
