33
Settings menu
Audio:
allows adjustments to Volume of the internal speaker. Adjustments
can also be made from the projector’s keypad and the remote.
Sources: Power-up Source
determines which source the projector checks
first for active video during power-up. When the
Autosource
feature is On,
the projector automatically finds the active source, checking the
Power-up
Source
first. The options are Computer 1 for a computer source, and Video
1 (for S-video connections), and Video 2 (for composite video connections)
for video sources. When this feature is Off, the projector defaults to the
source selected in Power-up Source. To display another source, you must
manually select one by pressing the
Computer
or
Video
button on the
remote or keypad.
System
:
Rear
reverses the image so you can project from behind a translu-
cent screen.
Ceiling
turns the image upside down for ceiling-mounted pro-
jection.
Display Messages
displays status messages (such as “Searching” or
“Mute”) in the lower-left corner of the screen.
NND
prevents your notebook
computer from going into Screen Save mode if the USB cable is connected.
Power Save
automatically turns the lamp off after no signals are detected
for 20 minutes. After an additional 10 minutes with no signal, the projector
powers down and can be toggled off. If an active signal is received before
the projector powers down, the image will be displayed. When Power Save
is enabled, Screen Save is disabled.
Screen Save
automatically blanks the
screen with a black color after no signals are detected for a preset number of
minutes. The image returns when an active source is detected or a remote or
keypad button is pressed.
Settings menu
Audio
Power-up
Source
Sources
System menu
Screen Save
Summary of Contents for 28A7100HC
Page 1: ...User s Guide Model 28A7100HC 401 599 00 ...
Page 2: ......
