background image

Downloaded from Projector.com

ENGLISH

Liquid Crystal Projector

USER'S MANUAL

USER'S MANUAL

ENGLISH-1

Thank you for purchasing this liquid crystal projector.

CONTENTS

CONTENTS

Page

FEATURES .......................................2
BEFORE USE ...................................2

Contents of Package ..............................2
Part Names.............................................3
Loading the Battery ................................5
Fixing the Handle....................................5

INSTALLATION ................................6

Installation of the Projector and Screen........6
Angle Adjustment ...................................6
Cabling ...................................................7
Power Connection ..................................8
Example of System Setup ......................8
Plug & Play .............................................8

OPERATIONS ...................................9

Power ON ..................................................9

Power OFF ..............................................9

Basic Operation ....................................10
Setup Menu ..........................................12
Input Menu............................................13
Image Menu..........................................14
Options Menu .......................................15
No Signal Menu ....................................16

MAINTENANCE ..............................17

Lamp.....................................................17
Air Filter ................................................19
Other Maintenance ...............................19

Page

TROUBLESHOOTING ....................20

OSD Message ......................................20
Indicators Message ..............................21
Symptom ..............................................22

SPECIFICATIONS...........................23
WARRANTY AND AFTER-SERVICE ......24

.......................................................................................

TABLES

Table 1. Installation Reference.................6
Table 2. Cabling .......................................7
Table 3. Basic Operations ......................10
Table 4. Setup Menu ..............................12
Table 5. Input Menu................................13
Table 6. Image Menu..............................14
Table 7. Options Menu ...........................15
Table 8. No Signal Menu ........................16
Table 9. OSD Message ..........................20
Table 10. Indicator Message ..................21
Table 11. Symptom ................................22
Table 12. Specifications .........................23

.......................................................................................

For "TECHNICAL" and "REGULATORY
NOTICE", see the end of this manual.

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in this manual 
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.

TRADEMARK ACKNOWLEDGMENT :

PS/2, VGA and XGA are registered trademarks of

International Business Machines Corporation. Apple, Mac and ADB are registered trademarks of
Apple Computer, Inc. VESA and SVGA are trademarks of the Video Electronics Standard
Association. Windows is a registered trademark of Microsoft Corporation. Carefully observe the
trademarks and registered trademarks of all companies, even when not mentioned.

NOTE

WARNING • Please read the accompanying manual “SAFETY
INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct

usage through understanding. After reading, store this instruction manual in a
safe place for future reference.

01CP-S370W  02.1.15 9:06 AM  ページ 1

Summary of Contents for 28A8052





















































Reviews: