223
8. User Supportware
• Operating the projector (manipulating desktop screen)
The displayed desktop screen can be manipulated by using the USB mouse connected to the projector. If the EXIT
button of the projector or remote control is pressed while the desktop screen is displayed, an auxiliary operation bar
is displayed at the lower left of the screen.
Manipulate the auxiliary operation bar by using the buttons of the projector or remote control.
<1>
<2>
<3>
<4>
<1>
(cut-off icon) �������Disconnects communication with the computer�
<2>
(Shift icon) ����������When the highlight is moved to this icon and the ENTER button is pressed, shift lock status is set�
The shift lock is canceled if the highlight is moved to this icon and the ENTER button is pressed
again�
<3>
(Ctrl icon) ������������When the highlight is moved to this icon and the ENTER button is pressed, control lock status is set�
The control lock is canceled if the highlight is moved to this icon and the ENTER button is pressed
again�
<4>
(ESC icon) �����������The same operation as when the [ESC] key of the computer is pressed is performed� This icon is
used, for example, to stop a slideshow of PowerPoint�
• Operating the projector (disconnecting communications)
1 Press the EXIT button while the desktop screen is displayed.
An auxiliary operation bar will be displayed at the lower left of the screen.
2 Move the highlight to
(cut-off icon) and press the ENTER button.
Communication will be disconnected and you are returned to the “DESKTOP CONTROL UTILITY” menu screen.
To resume communication, click [COMPUTER SEARCH].
After that, follow step 10 on the preceding page.
REFERENCE:
Communication can also be disconnected by clicking the projector icon on the taskbar and then clicking “Disconnect” while the
desktop screen is displayed.
