Dukane 6752WU User Manual Download

Page: 246 / 293

232

9. Using the Viewer (MM Models)

• Adobe PDF file

The first page will be displayed.

• The PDF file will fill the width of the screen.

Pressing the

▼

▲

button will scroll the screen down or

up.

The CTL +

▼

or CTL +

▲

button will move the screen one

page down or up.

To return to the thumbnail screen, press the EXIT button.
Pressing the ENTER button will change the display mode

between whole screen and part screen.
• When a passoword input window is displayed, it means

that the PDF file is password-protected.

Pressing the ENTER button will show the software

keyboard. Use the software keyboard to enter your
password.

Select [OK] and press the ENTER button. The PDF file

will be displayed.

• For more information on the software keyboard, see page

NOTE:

Bookmarks and notes that were added after PDF conversion will not

be displayed.

If fonts were not embedded at the time of PDF conversion, those fonts

will not be displayed.

TIP:

It takes some time (about 30 seconds to two minutes) to display a

large size file or to turn pages of a PDF file that has many pages.

Summary of Contents for 6752WU






































































































































































































































































































Search results

Summary of Contents for 6752WU

Reviews:

Related manuals for 6752WU

Brands by name

Popular brands

Dukane 6752WU, User Manual

Search results

Summary of Contents for 6752WU

Reviews:

Related manuals for 6752WU

Brands by name

Popular brands