16
2. Projecting an Image (Basic Operation)
Standby
Blinking
Power On
Steady red light
Blinking blue
light
Steady blue
light
❸
Turning on the Projector
1. Remove the lens cap.
2. Press the
(POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator will light up in blue from red and
then start blinking. After that, the image will be projected
onto the screen.
TIP:
• When the message “PROJECTOR IS LOCKED! ENTER YOUR
PASSWORD.” is displayed, it means that the [SECURITY]
feature is turned on. (
→
page
38
)
• When the ECO message is displayed, it means that [ON] is
selected for [ECO MESSAGE]. (
→
page
110
)
• Pressing buttons such as power button and MENU button will
make sound. To turn off the beep sound, select [OFF] for [BEEP]
from the menu. (
→
page
121
)
After you turn on your projector, ensure that the computer
or video source is turned on.
NOTE: A blue screen (blue background) is displayed when no signal
is being input (by factory default menu settings).
(
→
page
270
)
