4
1. Introduction
• Slot for optional board
This projector has a slot for optional boards (sold separately).
• Simultaneous display of 2 images (PIP/PICTURE BY PICTURE)
Two images can be projected simultaneously with a single projector.
There are two types of layouts for the two images: “picture-in-picture” (PIP) in which a sub-picture is displayed on
the main picture, and “picture-by-picture” (PICTURE BY PICTURE) in which the main and sub pictures are displayed
next to each other.
• Multi-screen projection using multiple projectors
This projector is equipped with multiple HDMI input & output terminals that can connect multiple projectors in a
daisy chain. By dividing and projecting high resolution image on each projector, high quality image can be realized.
Furthermore, the boundaries of the screens are smoothed using an edge blending function.
• Supports HDMI 3D format
This projector can be used to watch videos in 3D using commercially-available 3D emitters that support Xpand 3D
and active shutter-type 3D eyewear.
Network
• Convenient utility software (User Supportware)
This projector supports our utility software (NaViSet Administrator 2, Virtual Remote Tool, etc.)
.
NaViSet Administrator 2 helps you control the projector by a computer via wired LAN connection.
Virtual Remote Tool helps you perform operations by a virtual remote control such as projector's power on or off
and signal selection via wired LAN connection. Moreover, it has function to send an image to the projector and
register it as the logo data.
Please visit our web site for downloading each software.
URL:
• CRESTRON ROOMVIEW compatible
This projector supports CRESTRON ROOMVIEW,allowing multiple devices connected to the network to be man-
aged from a computer or controller.
Energy-saving
• Energy-saving design with a standby power consumption of 0.30 watts or under
When the on-screen menu’s standby mode is set to “NORMAL”, the power consumption in the standby mode is
0.30 watts or under.
0.20 watts with power voltage AC110V-130V and 0.30 watts with power voltage AC200V-240V.
• “LIGHT MODE” for low power consumption and “Carbon Meter” display
The projector is equipped with an “LIGHT MODE” for reducing power consumption during use. Furthermore, the
power-saving effect when the LIGHT MODE is set is converted into the amount of reductions of CO
2
emissions
and this is indicated on the confirmation message displayed when the power is turned off and at “Information” on
the on-screen menu (CARBON METER).
