47
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table
below can be performed. Select an item using the
▲/▼ cursor buttons, and press the ► cursor button
or the
ENTER
button to execute the item. Then
perform it according to the following table.
Item
Description
VOLUME
Using the ◄/► buttons adjusts the volume.
Low
High
SPEAKER
Using the ▲/▼ buttons turns on/off the built-in speaker.
ON
OFF
When OFF is selected, the built-in speaker does not work.
AUDIO SOURCE
While the image signal from the input port chosen in step (1) is
projected, the audio signal from the input port selected in step
(2) is output to both the
AUDIO OUT
port and built-in speaker of
this projector. However, the built-in speaker does not work when
SPEAKER is set to OFF.
(1) Choose a picture input port using the
▲/▼ buttons.
Choose STANDBY to select the sound
output in the standby mode.
(2) Select one of the
AUDIO IN
ports using
◄/► buttons.
Select to mute the sound from the
input port or in the standby mode chosen in the step (1).
• In the AUDIO SOURCE window, “H” symbolizes the audio signal
from the
HDMI
port. It can be selected only for the picture input from
the
HDMI
port.
• Even if the projector is in the standby mode, cooling fans may
work and make noises when the built-in speaker is in operation.
• C.C. (Closed Caption) is automatically activated when is selected
and an input signal containing C.C. is received. This function is
available only when the signal is NTSC for
VIDEO
or
S-VIDEO
, or
480i@60 for
COMPUTER IN1
or
COMPUTER IN2
, and when AUTO
is selected for DISPLAY in the C.C. menu under the SCREEN menu
(
54
).
(continued on next page)
Summary of Contents for 8107HWI
Page 2: ......
