23
Operating
• The MAGNIFY dialog will automatically disappear in several seconds with
no operation. The dialog will appear again if the
MAGNIFY ON
button is pressed
when the dialog has automatically disappeared.
• While the MAGNIFY dialog is displayed, press the
MAGNIFY ON
button to switch
the dialog between magnifying area shifting (with the triangles) and magnification
ratio adjustment (with the magnifying glass icon).
• The magnification is automatically disabled when the displaying signal or its
display condition is changed.
• While the magnification is active, the keystone distortion condition may vary. It will
be restored when the magnification is disabled.
• Some horizontal stripes might be visible on the image while magnification is active.
NOTE
1.
Press the
MAGNIFY ON
button on the remote control. The
picture will be magnified, and the MAGNIFY dialog will appear on
the screen. When the
MAGNIFY ON
button is pressed for the first
time after the projector is turned on, the picture will be zoomed by
1.5 times. On the dialog, triangle marks to show each direction
will be displayed.
Using the magnify feature
2.
3.
4.
5.
While the triangles are displayed on the dialog, use the ▲/▼/◄/►
cursor buttons to shift the magnifying area.
A magnifying glass icon will be displayed on the dialog when the
MAGNIFY ON
button is pressed while the dialog with the triangles is displayed.
While the magnifying glass icon is displayed on the dialog, use the ▲/▼ cursor
buttons to adjust the magnification ratio. The magnification ratio will be adjusted
with fine steps. And changes in the ratio in single steps are subtle so they may be
hard to recognize.
Press the
MAGNIFY OFF
button on the remote control to exit magnification.
1.
Press the
KEYSTONE
button on the remote control.
A dialog will appear on the screen to aid you in correcting the
distortion.
Correcting the keystone distortions
2.
Use the ◄/► cursor buttons for adjustment.
To close the dialog and complete this operation, press the
KEYSTONE
button again. Even if you do not do anything, the
dialog will automatically disappear after a few seconds.
● The adjustable range of this function varies for each input signal. For some input,
this function may not work well.
● When the projector is inclined to near ±6 degrees or over, this function may not
work well.
● This function will be unavailable when the Transition Detector is activated (
63
).
● The OSD menu might be displayed outside of the image display area depending
on the adjustment value of the ASPECT, D-ZOOM and KEYSTONE. Changing
the values of ASPECT, D-ZOOM and KEYSTONE may fix the symptom.
MAGNIFY
ON/OFF
buttons
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT
SEARCH
BLANK
MUTE
MY BUTTON
1
2
COMPUTER
MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
ON
OFF
㧗
FREEZE
KEYSTONE
button
KEYSTONE
ASPECT
SEARCH
BLANK
MUTE
MY BUTTON
1
2
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
ON
OFF
㧗
FREEZE
