Page 29
Section 5 – Options
Dukane Manual Part No. 403-608-00
Figure 5-1
Generator with Heat Sink Option
Heat Sink
The thermal design of 600 watt generators is for
applications that require a power of 600 watts or less at
duty cycles less than 50%.
For applications that require higher duty cycles, an optional
cooling package is available. The Dukane Part Number for
the package is 438-1020.
The cooling package is standard on 1200 watt models and
includes a heat sink that mounts to the generator as shown
in Figure 5-1 below.
When operating an iQ Auto-Plus MPC generator with the
optional heat sink, do so with the generator in the vertical
position as shown in Figure 5-1. Air flow is enhanced, and
the heat sink’s efficiency is maximized.
CAUTION
Operate the iQ Auto-Plus
generator in the vertical po-
sition as shown in Figure
5-1. This allows for optimal
air circulation enabling the
heat sink to be most effective.
Heat Sink
Air Flow