10
General Preparation
Using the Remote Control
Use the remote control by pointing it towards the remote sensor window located at the lower left front
of the panel.
Cautions Regarding Using of Remote Control
Do not expose the remote control to impacts or other rough treatment. In addition, do not expose the
remote control to liquids, and do not place it in an area with high humidity.
The remote control may not work properly if the remote sensor widow of the panel is in direct sunlight
or strong lighting. In such a case, block the external lighting or move the panel. You can also operate
the remote control closer to the remote sensor window.
Installing the Batteries
For initial operation add 2 AAA batteries to the remote control. If the remote control fails to operate,
replace the batteries.
1. Open the battery cover.
2. Insert two size AAA batteries. (Place the batteries with their terminals corresponding to the (+) and
(-) indications in the battery compartment.
3. Replace the cover.
Precaution on battery use
Improper use of batteries can result in a leakage of chemicals and/ or explosion. Be sure of follow the
instruction below.
Place batteries with their terminals corresponding to the (+) and (-) indications.
Different types of batteries have different characteristics. Do not mix batteries of different types.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
batteries and/or cause old batteries to leak chemicals.
Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can
cause a skin rash or damage the device. If chemical leakage is found, wipe it with a dry cloth.
If the remote control is not used for an extended period of time, remove the batteries from the
remote control.
The batteries and the remote control should not be exposed to excessive heat such as sunshine,
heaters, or fire.
Power Connection
Insert the panel’s AC plug into a convenient AC outlet. The panel power port is on the bottom side of
the input ports unit. Normal Input voltage range: 100V
～
240V. Frequency range: 50Hz/60Hz ±5%
Note: This product should be operated only from the type of power source indicated on the marking label.
Unplug the AC cord from the power outlet when not using for a long period of time.
