Installation and Operation of: FLM100 Half Rack Retro
Duke Manufacturing Co.
2305 N. Broadway
St. Louis, MO 63102
Phone: 314-231-1130
Toll Free: 1-800-735-3853
Fax: 314-231-5074
www.dukemfg.com
INSTALLATION - continued
UPDATE - COMPLETE
Step 15
Level Unit. To ensure the door of this unit seals
completely, the unit must be fully leveled in all
directions.
NOTE:
This must be done
before the unit is sealed to
the floor or built into a curb.
NOTE
: The unit can be
leveled by adjusting the feet
using adjustable pliers.
Step 15A
Level Unit front to back on both sides.
Step 15B
Level unit side to side, both front and back.
Step 15C
Check the top and bottom corner seal of the door
gasket. There should be no gap.
NO GAP
GAP
RE-ADJUST
