VC200SDD-B Refrigerator User’s Manual
Page 14 of 16
10. User Training
The end user of the VC200SDD should be instructed in the simple processes outlined below and
also those in Section 22. It should be stressed that these tasks are essential to ensure correct and
reliable operation of the refrigerator.
Caution: failure to follow these instructions may lead to system failure and wastage.
If you have a problem, please contact your appointed engineer.
When turning on for the first time or when the refrigerator has been turned off for more than 3
days:
Connect the solar panels and allow the refrigerator to run for at least 7 days.
Before loading, ensure that the temperature display on the front of the refrigerator reads
+4.5
o
C or less by 4pm in the afternoon.
Daily Routine
Keep the lid closed, open only when required and lock after use.
Do not keep food or drink in the refrigerator.
11. Maintenance Tasks
Every morning and afternoon:
Check the temperature
Fill in the daily record sheet
On the first day of every week:
Wipe away any moisture build up around cabinet lid
Clean the solar array
On the first day of every month:
Clean the refrigerator, condensers and compressors and drain any water from the
bottom of the cabinet using the inbuilt drain
Check the solar array is not shaded between 7am and 5pm
Every 6 months:
Check all mechanical fixings and electrical connections (including the array)
12. VC200SDD-B System Layout
