www.factorybuysdirect.com
7
M180017-1
OPERATING INSTRUCTIONS CONT.
Button (F): °C / °F
Push button F to change the heat readout settings. °C for Celsius, °F for Fahr-
enheit. Corresponding icon will be shown on front screen after the button is
pressed.
REMOTE CONTROL OPERATION:
This heater includes a remote control. Each remote control is shipped with a
plastic tab inserted into the battery compartment to prevent damage and power
loss. Please remove the plastic tab by pulling the plastic tab out of the compart-
ment. See below for directions to use the remote control:
G
H
I
J
K
L
M
N
O
P
Q
F/C
Power
H/L
Button (G): “ON” / “OFF” Button
Push button G to turn electric fireplace on, power icon on front screen will turn
yellow, the flame effect will come on when electric fireplace is on. Push button G
again, power icon will disappear, no flame effect.
Button (M): Low / High Heating
The default heat setting is high heating after the heater turns on, two heating
icons shown on front screen as high heating mode. Press button M once, it will
change to low heating mode, only one heating icon shown on front screen. Press
button M again, it will return to high heating mode.
Button (H): Dimmer (Brightness Decrease)
Push button H to decrease the flame effect.
