INSTRUCTION MANUAL
13
TROUBLESHOOTING
If you feel the appliance is out of order, follow these instructions to try to see if you can solve the problem simply by
yourself before calling for service.
PROBLEM
POSSIBLE CAUSE/MEASURE
The Wine Cooler does not operate
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
The Wine Cooler is not cold enough
Check the temperature control setting.
External environment may require a higher setting. The door
is opened too frequently.
The door is not closed completely.
The door gasket does not seal properly.
Automatically turn-on and turn-off
frequently
The room temperature is hotter than normal.
A large amount of contents has been added to the Wine Cooler.
The door is opened too frequently. The door is not closed
completely.
The temperature control is not set correctly. The door gasket
does not seal properly.
The lighting does not work
Not plugged in.
The circuit breaker tripped or a blown fuse. The lighting is
turned off.
Too much vibration
Check to assure that the appliance is level.
Check to assure no parts inside the cabinet or in the
compressor chamber are loose.
The Wine Cooler seems to make too much
noise
The rattling noise may come from the flow of the refrigerant,
which is normal.
As each cycle ends, you may hear gurgling sounds caused by
the flow of refrigerant.
Contraction and expansion of the inside walls may cause
popping and crackling noises.
The appliance is not level.
The door will not close properly.
The wine COOLER is not level.
The door was reversed and not properly installed. The gasket
is dirty.
The shelves are out of position.
The display window is shown with “HH” or “LL”
instead of a digital figure, and/or with
continuous buzz sound.
The temperature probe is out of order.
