3
INSTALLATION INSTRUCTIONS
Before Using Your Wine cooler
Remove the exterior and interior packing.
Before connecting the Wine cooler to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
This appliance is intended to be used in household and similar applications such as
– staff kitchen areas in shops, offices and other working environments;
– farm houses and by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments;
–
catering and similar non-retail applications.
When disposing your appliance, please choose an authorized disposal site.
Installation of Your Wine cooler
This
appliance is designed to be for free standing installation or built-in (fully recessed)
(Refer to sticker location the back of this appliance).
This appliance is intended to be used exclusively for the storage of wine .
Place your Wine cooler on a floor that is strong enough to support it when it is fully
loaded. To level your Wine cooler, adjust the front leveling leg at the bottom of the Wine
cooler.
This appliance is using flammability refrigerant.So never damage the cooling pipework
during the transportation.Locate the Wine cooler away from direct sunlight and sources
of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and
heat sources may increase electrical consumption. Extreme cold ambient temperatures
may also cause the unit not to perform properly.
Avoid locating the unit in moist areas.
Plug the Wine cooler into an exclusive, properly installed-grounded wall outlet. Do not
under any circumstances cut or remove the third (ground) prong from the power cord.
Any questions concerning power and/or grounding should be directed toward a certified
electrician or an authorized Products service center.
Attention
Store wine in sealed bottles;
Do not overload the cabinet;
Do not open the door unless necessary;
Do not cover shelves with aluminum foil or any other shelf material which may prevent
air circulation;
Should the Wine cooler be stored without use for long periods it is suggested, after a
careful cleaning, to leave the door ajar to allow air to circulate inside the cabinet in
order to avoid possible formations of condensation, mold or odors.
Ambient Room Temperature Limits
This appliance is designed to operate in ambient temperatures specified by its temperature
class marked on the rating plate.
Class
Symbol
Ambient Temperatures range(
℃
)
Extended Temperate
SN
﹢
10 to
﹢
32
Temperate
N
﹢
16 to
﹢
32
Subtropical
ST
﹢
16 to
﹢
38
Tropical
T
﹢
16 to
﹢
43
