4
PRODUCT FEATURES
•
Built-in or Free-standing installation with single, dual
or three temperature zone, depending on your
model.
•
Continuously variable electronic temperature control
with digital display and touchpad input.
•
Temperatu
re can be set from 5° to 20°C (41° to 68°F
)***** for either compartment and can be displayed in
either Fahrenheit or Celsius.
•
Can be set to the long time storage maturing
temperature or a specific serving temperature for
red/white/sparkling wines.
•
Cooling and Heating (for particular items only) to
maintain the perfect storaging and/or service
condition.
•
Dynamic compressor type cooling to ensure interior
air circulation with even distribution of temperature
and humidity.
•
Soft LED Interior Light with ON/OFF switch
–
Function mode and Showcase mode. Open-door
and malfunction warning system (for particular items
only)
•
Sabbath mode will allow the lights to remain off
during certain religious observances (for particular
models only).
•
Temperature memory function - If power is
interrupted (power surge, breaker switch, etc.) and
then powered up again, the unit will operate with the
last temperature set-point. for particular
models only)
•
Automatic defrosting with defrost water evaporation.
•
Reversible tempered double/triple pane glass door
protects your wine from UV light and creates an
attractive display with few condensation and low
noise.
•
Black coated matte steel outer frame and black
plastic interior liner offer lifetime performance and
stability. The black liner prevents excessive light from
damaging the maturity process.
Full glass or
seamless stainless steel-framed glass door with
stainless steel handle.
•
Beech shelves allow for maximum convenience and
flexibility to accommodate various size bottles
(except DX-7.20 models).
Security lock system
with keys (for particular items only).
•
Passive humidity control system (Humidity Box).
Active charcoal air filter (for particular items only).
NOTE:
Features and specifications are subject to
change without notice.
INSTALLATION
BEFORE USING YOUR APPLIANCE
• Remove all exterior and interior packing. Clean the
interior surface with lukewarm water using a soft
cloth. The unit may have residual odors at first, they
will disappear as the unit cools.
• Before connecting the appliance to the power source,
let it stand upright for at least 24 hours. This will
reduce the possibility of a malfunction in the cooling
system caused by handling during transportation.
During this time we recommend that you leave the
door open to clear any residual odors.
• The door on this appliance can be opened from either
the left or the right side. The unit is delivered with the
door opening on the left side. Should you wish to
open the door from the right, follow the instructions
‘Reversing the door hinge’Install the handle on the
door if necessary.
INSTALLATION OF YOUR APPLIANCE
• The appliances are designed to be built-in or
recessed or free standing installation.
•
WARNING:
Do not store or install the appliance
outdoors. The unit is for indoor use only.
•
WARNING:
Do no install the appliance in the
laundry. Avoid locating the unit in damp areas.
• Place your appliance on a floor that is strong enough
to support it when it is fully loaded. Remove the
transport legs before installation. Fix installation legs
(packed to your user manual) if you need to level the
unit only.
• For freestanding installation, 100mm of space
between the back and sides of the unit are
suggested, which allows the proper air circulation to
cool the compressor and condenser for energy
saving. Even for built-in installation, it is a must to
keep 5mm space on each side and at the top to
ensure proper service access and ventilation. Take
care that the air vent at the front of the appliance
must never be covered or blocked in any way.
• Locate the unit away from direct sunlight and sources
of heat (stove, heater, radiator, etc.). Direct sunlight
may affect the acrylic coating and heat sources may
increase electrical consumption. Extreme cold
ambient temperatures may also cause the unit not to
perform properly.
• Plug the unit into an exclusive, easily accessible plug
socket. Any questions concerning power and/or
earthing should be directed towards a qualified
electrician or an authorized products service centre.
• The appliance must be installed to all electrical,
connections in accordance with state and local
codes.
•
IMPORTANT: HIGH HUMIDITY CLIMATE.
During
periods of high humidity, some condensation may
appear on outside surfaces of glass door. This
condensation will disappear when humidity levels
drop. For prevention, it is advisable to install the
appliance with sufficient ventilation in a dry and/or an
air-conditioned place.
NOTE: The appliance must be positioned so
that the plug is accessible.
