9
SAFETY - Machine Specific
This section gives specific guidelines for safe operation of the Maxi-Till.
These guidelines were current at the time of publication but may be superseded by
later circumstances. They do not necessarily cover every possible hazard and must be
read with the
SAFETY - General
section (Pages 4-8).
Hazard Points on the Maxi-Till
The lists below are not all-inclusive and serve only to highlight the more obvious areas
of risk. The decals attached to the machine are a general reminder that there are
hazardous areas, rather than specifically highlighting all possible hazards.
No Ride
Passengers are not permitted anywhere on the machine
Pinch Points/Moving Parts
Hazardous areas include crumblers.
Slippery When Wet
Hazardous areas include all smooth surfaces on the frame structure.
Keep Clear
Hazardous areas include:
D
Between the tractor and the cultivator.
D
Immediately adjacent to the cultivator sides.
D
The rear of the machine, including revolving crumbler.
Sharp Points
Hazardous areas include all tine points
5
4
Pt. No. 67202
Issue 0806
3
Safety Decals
Item Decal/Guard Part No Qty
1
‘Keep Clear’
43904
2
2
‘Pinch Point/Moving Parts’
43901
2
3
‘No Ride’
43900
1
4
‘Slippery When Wet’
43902
1
5
‘Sharp Points’
43903
1
1
3
4
5
1
2
