P/N 501015-135 Rev
. D
If two pickups sound thin and nasal when used together, chances are, they’re out of phase with each other. If you’re combining your
Seymour Duncan pickup(s) with Fender
®
pickup(s) in the same guitar, you’ll need to reverse the black and white wires on the Seymour
Duncan. In other words, solder the white wire to ground and the black wire to the selector switch.
If you end up reversing the phase of your Stack Plus:
To use the coil splitting option, you will need to wire your split switch so the red wire shorts to the black wire instead of ground.
We’re not just pickups anymore. Seymour Duncan also makes super cool stompboxes. And our sister company,
D-TAR, is turning out some really hip amplification products for serious acoustic guitarists (d-tar.com).
