background image

 
1 INTRODUCTION 

Thank you for purchasing Dune Lighting equipment and hope you use it with great pleasure. 

This leaflet aims to help you better understand many facets of the device and avoid any defective manipulation. We 

recommend that you carefully follow the directions below. 

The "MINI-DMX" allows you to control the most of your devices while enabling complete freedom of movement. In fact, 

you can control any standard DMX512 line with this compact. 

In addition, the device can work under 9V battery. Therefore, you will not need to seek a power outlet before you install 

DMX512 controller. 

 

2 WARNINGS

 

The device meets all European Union standards and carries the CE mark. 

WARNINGS: The adapter is powered by a hazardous voltage. Leave the maintenance to skilled personnel. 

Never make any modification in the adapter that is not described in this manual. Bad handling may cause 

electric shock. 

Please observe the following points:   

• The device is powered by 9 Volts DC. Never touch the inside of the device. Mishandling may cause an electric shock.   

• The unit and the adapter must be installed professionally and safely.   

• Make sure the unit and adapter not receive a shock before.   

• The starting and stopping frequently can damage the device.   

• Do not operate the device, the adapter or power cord if your hands are wet.   

• Do not operate the unit or unplug it immediately when:   

1. There is any visible damage on the device, the adapter or power cord.   

2. A defect arises from falling or similar accident, or you have a doubt about the state of the device or power 

supply.  

3. Malfunctions occur.   

• Always use a qualified technician for repair.   

• Do not unplug by pulling directly on the cord.   

• We disclaim any responsibility for damage or injury resulting if the device are used for purposes of other than for 

which they were designed, if they are not properly connected, used or are not repaired by an authorized person.   

• Keep the device and the power supply away from children.   

• Use the original packaging to transport the device.   

• For safety reasons, never change inside of the device or power adapter. 

 

3 SPECIFICATIONS

 

Power 

supply 

 

 

        DC 

9V 

or 

Battery: 

9V 

(Type 

6LR61) 

Consumption 

 

         0.7 

59 

mA 

Number of channels     

 

 

 

 

 

 

 

54 

Number 

of 

channels 

per 

page 

 

      6 

Standard 

control 

         DMX512 

 

Dimensions L x l x h (mm)     

 

 

 

 

 

 

200 x 125 x 45 

Weight (g)    

 

 

 

 

 

 

 

 

 

1 kg 

Operating 

temperature 

        -10 

° 

to 

50 

° 

 

Summary of Contents for MINI-DMX









Reviews: